Píobán Hiodrálacha Ardbhrú
Is píopa solúbtha é an píobán hiodrálach a úsáidtear chun sreabhán ardbhrú a iompar i gcórais hiodrálacha. Tá sé comhdhéanta de chiseal rubair istigh, ciseal athneartaithe agus ciseal rubair seachtrach. Tá tréithe friotaíocht ardbhrú, friotaíocht cuisle agus solúbthacht maith aige. Tá Hose Hiodrálacha Hangzhou Haikuo tar éis ISO9001: 2008, MSHA, SGS, FDA, GOST agus deimhnithe eile a rith. Comhlíonann ár píobáin caighdeáin SAE agus DIN EN agus úsáidtear iad go forleathan in innealra innealtóireachta, trealamh mianadóireachta, innealra talmhaíochta, hiodrálaic long agus réimsí eile.
Cás aicmithe de réir iarratais
píobán hiodrálacha ginearálta (sraith SAE 100R)
Feidhmchláir chaighdeánacha tionsclaíocha
01
píobán ardbhrú -(EN 856 4SP/4SH)
Brú pléasctha Níos mó ná nó cothrom le 4 huaire an brú oibre
02
píobán ardteochta (-40 céim ~+150 céim )
Déanamh cruach, tionscal teilgcheárta
03
píobán fhrithstatach
Seachadadh breosla, timpeallacht inadhainte
04
píobán grád bia (deimhnithe FDA)
Trealamh próiseála bia
05
- Feadán istigh: rubar sintéiseach ola-resistant.
- Ciseal treisithe: athneartú foirceannadh braidáilte sreang snáithín nó cruach
- Ciseal clúdaigh: rubar sintéiseach resistant caitheamh, ózóin, hidreacarbóin.
Dathanna coitianta: dubh, liath, gorm, buí, dearg, etc.
I measc ár dtáirgí
SAE 100 R1, SAE 100 R2, SAE 100 R3, SAE 100 R5, SAE 100 R6, SAE 100 R7 , SAE 100 R8, SAE 100 R12 , SAE 100 R13 , SAE 100 R13 , SAE 100 R10, SAE 100 R10, SAE 100 R10, SAE 100 R10, SAE , SAE 100 R17, SAE 100R19;
GA 853 1SN, EN 853 2SN, EN 854 2TE, EN 854 3TE, EN 855 R7, EN 855 R8, GA 856 4SP, GA 856 4SH, GA 857 1SC ,EN 856 2SC;
ISO 1436 1SN, ISO 1436 2SN, ISO 11237 1SC, ISO 1437 2SC
| Cuid Uimh | Leamh | Hose LD. | Braid OD | HoseOD | MaxW.P. | Min. BP | M isteach. Ga Bend | Weiaht | |||||
| isteach | mm | mm | isteach | mm | psi | mpa | psi | mpa | isteach | mm | kg/m | ||
| Ceanncheathrú-1SN-03 | 4 | 3/16" | 4.8 | 9.5 | 0.47 | 11.9 | 3630 | 25.0 | 14520 | 100.1 | 3.5 | 89 | 0.19 |
| Ceanncheathrú-1SN-04 | 6 | 1/4" | 6.4 | 11.1 | 0.53 | 13.6 | 3270 | 22.5 | 13080 | 90.2 | 4.0 | 102 | 0.21 |
| Ceanncheathrú-1SN-05 | 8 | 5/16" | 7.9 | 12.7 | 0.59 | 15.1 | 3120 | 21.5 | 12480 | 86.0 | 4.5 | 114 | 0.24 |
| Ceanncheathrú-1SN-06 | 10 | 3/8" | 9.5 | 15.1 | 0.68 | 17.5 | 2615 | 18.0 | 10460 | 72.1 | 5.0 | 127 | 0.33 |
| Ceanncheathrú-1SN-08 | 13 | 1/2" | 12.7 | 18.3 | 0.81 | 20.7 | 2320 | 16.0 | 9280 | 64.0 | 7.0 | 178 | 0.41 |
| Ceanncheathrú-1SN-10 | 16 | 5/8" | 15.9 | 21.4 | 0.93 | 23.8 | 1890 | 13.0 | 7560 | 52.1 | 8.0 | 203 | 0.45 |
| Ceanncheathrú-1SN-12 | 19 | 3/4" | 19.0 | 25.4 | 1.09 | 27.8 | 1530 | 10.5 | 6120 | 42.2 | 9.5 | 241 | 0.58 |
| Ceanncheathrú-1SN-16 | 25 | 1" | 25.4 | 33.3 | 1.40 | 35.8 | 1280 | 8.8 | 5120 | 35.3 | 12.0 | 305 | 0.88 |
| Ceanncheathrú-1SN-20 | 32 | 1 1/4" | 31.8 | 40.5 | 1.69 | 43.1 | 920 | 6.3 | 3680 | 25.4 | 16.5 | 419 | 1.23 |
| Ceanncheathrú-1SN-24 | 38 | 1 1/2" | 38.1 | 46.8 | 1.97 | 50.1 | 730 | 5.0 | 2920 | 20.1 | 20.0 | 508 | 1.51 |
| Ceanncheathrú-1SN-32 | 50 | 2" | 50.8 | 60.2 | 2.50 | 63.6 | 580 | 4.0 | 2320 | 16.0 | 25.0 | 635 | 1.97 |
| Cuid Uimh | Leamh | HoseLD. | Braid OD | Hose OD | Uasmhéid WP | Min. BP | Min. Ga Bend | Weiaht | |||||
| isteach | rrtn | mm | i n | rrtn | nsi | mna | nsi | mna | isteach | mm | kw/m | ||
| Ceanncheathrú-2SN-03 | 4 | 3/16' | 4.8 | 11.1 | 0.48 | 13.4 | 6000 | 41.4 | 24000 | 165.5 | 3.5 | 89 | 0.31 |
| Ceanncheathrú-2SN-04 | 6 | 1/4" | 6.4 | 12.7 | 0.59 | 15.1 | 5800 | 40.0 | 23200 | 160.0 | 4.0 | 100 | 0.33 |
| Ceanncheathrú-2SN-05 | 8 | 5/16' | 7.9 | 14.3 | 0.65 | 16.6 | 5000 | 35.0 | 20300 | 140.0 | 4.5 | 115 | 0.39 |
| Ceanncheathrú-2SN-06 | 10 | 3/8" | 9.5 | 16.7 | 0.75 | 19.1 | 4800 | 33.1 | 19200 | 132.4 | 5.0 | 125 | 0.5 |
| Ceanncheathrú-2SN-08 | 13 | 1/2" | 12.7 | 19.8 | 0.88 | 22.2 | 4000 | 27.6 | 16000 | 110.3 | 7.0 | 180 | 0.59 |
| Ceanncheathrú-2SN-10 | 16 | 5/8" | 15.9 | 23 | 1 | 25.4 | 3630 | 25.0 | 14520 | 100.1 | 8.0 | 200 | 0.71 |
| Ceanncheathrú-2SN-12 | 19 | 3/4" | 19.0 | 27 | 1.16 | 29.4 | 3120 | 21.5 | 12480 | 86.0 | 9.5 | 240 | 0.86 |
| Ceanncheathrú-2SN-16 | 25 | 1" | 25.4 | 34.9 | 1.5 | 38.1 | 2400 | 16.5 | 9600 | 66.2 | 12.0 | 300 | 1.28 |
| Ceanncheathrú-2SN-20 | 32 | 1 1/4" | 31.8 | 44.5 | 1.88 | 48.3 | 1820 | 12.5 | 7280 | 50.2 | 16.5 | 420 | 2.02 |
| Ceanncheathrú-2SN-24 | 38 | 1 1/2" | 38.1 | 44.9 | 2.13 | 54.6 | 1310 | 9.0 | 5240 | 36.1 | 20.0 | 500 | 2.2 |
| Ceanncheathrú-2SN-32 | 50 | 2" | 50.8 | 50.8 | 2.63 | 67.3 | 1160 | 8.0 | 4640 | 32.0 | 25.0 | 630 | 2.85 |
| Cuid | ID Méid Hose | Hose OD | uas. Brú Oibre | Min. Ga Bend | Min. Brú pléasctha | Meáchan | |||||
| isteach | DIN | isteach | mm | psi | mpa | isteach | mm | psi | mpa | (kg/m) | |
| R3-04 | 1/4 | 6.4 | 0.56 | 14.3 | 1250 | 8.6 | 3 | 76 | 5000 | 34.5 | 0.16 |
| R3-05 | 5/16 | 7.9 | 0.68 | 17.5 | 1200 | 8.3 | 4 | 102 | 4800 | 33.1 | 0.25 |
| R3-06 | 3/8 | 9.5 | 0.75 | 19.1 | 1125 | 7.8 | 4 | 102 | 4500 | 31 | 0.28 |
| R3-08 | 1/2 | 12.7 | 0.93 | 23.8 | 1000 | 6.9 | 5 | 127 | 4000 | 27.6 | 0.41 |
| R3-10 | 5/8 | 15.9 | 1.06 | 27.0 | 875 | 6.0 | 5.5 | 140 | 3500 | 24.1 | 0.47 |
| R3-12 | 3/4 | 19 | 1.25 | 31.8 | 750 | 5.2 | 6 | 152 | 3000 | 20.7 | 0.65 |
| R3-16 | 1 | 25.4 | 1.5 | 38.1 | 565 | 3.9 | 8 | 203 | 2260 | 15.6 | 0.78 |
| R3-20 | 1 1/4 | 31.8 | 1.75 | 44.4 | 377 | 2.6 | 10 | 254 | 1508 | 10.4 | 1.00 |
| Cód Mír | Píobán I D. | Hose OD | Brú Oibre | Brú pléasctha | Ga Mm.Bend | Meáchan | ||||||
| orlach | mm | orlach | mm | psi | MPa | psi | MPa | orlach | mm | kg/m | Ib/ft | |
| R5-05 | 3/16" | 5 | 0.54 | 13.7 | 3045 | 21 | 12180 | 84 | 3 | 75 | 0.24 | 0.16 |
| R5-06 | 1/4" | 6.3 | 0.6 | 15.3 | 3045 | 21 | 12180 | 84 | 3.3 | 85 | 0.28 | 0.19 |
| R5-08 | 5/16" | 8 | 0.69 | 17.6 | 2275 | 15.7 | 9135 | 63 | 4 | 100 | 0.35 | 0.24 |
| R5-11 | 13/32" | 11 | 0.79 | 20 | 2030 | 14 | 8120 | 56 | 4.5 | 115 | 0.38 | 0.26 |
| R5-13 | 1/2" | 12.5 | 0.95 | 24 | 1785 | 12.2 | 7105 | 49 | 5.5 | 140 | 0.51 | 0.34 |
| R5-16 | 5/8" | 16 | 1.1 | 28 | 1525 | 10.5 | 1740 | 42 | 6.5 | 165 | 0.68 | 0.46 |
| R5-22 | 7/8" | 22 | 1.27 | 32.2 | 812 | 5.6 | 3248 | 22.4 | 7.3 | 185 | 0.7 | 0.47 |
| R5-29 | 1.1/8" | 29 | 1.53 | 38.9 | 625 | 4.3 | 2538 | 17.5 | 9 | 230 | 0.8 | 0.54 |
| R5-35 | 1 3/8" | 35 | 1.78 | 45.2 | 507.5 | 3.5 | 2030 | 14 | 10.4 | 265 | 0.93 | 0.63 |
| R5-46 | 1 13/16" | 46 | 2.27 | 57.6 | 348 | 2.4 | 1421 | 9.8 | 13.2 | 335 | 1.32 | 0.89 |
| R5-60 | 2 3/8" | 60 | 2.92 | 74.2 | 348 | 2.4 | 1421 | 9.8 | 24 | 610 | 2.96 | 2.00 |
| R5-76 | 3" | 76 | 3.6 | 91.7 | 203 | 1.4 | 812 | 5.6 | 33 | 840 | 4.1 | 2.77 |
| Cuid Uimh | Leamh | Hose LD. | Braid OD | Hose OD | Uasmhéid WP | Mion.BP | Ga Min.Bend | Meáchan | |||||
| isteach | mm | mm | isteach | mm | psi | mpa | psi | mpa | isteach | mm | kg/m | ||
| Ceanncheathrú-R6-03 | 4 | 3/16" | 4.8 | 10.3 | 0.43 | 11.1 | 500 | 3.4 | 2000 | 11 | 2 | 51 | 0.09 |
| Ceanncheathrú-R6-04 | 6 | 1/4" | 6.4 | 11.9 | 0.5 | 12.7 | 400 | 2.8 | 1600 | 11 | 2.5 | 64 | 0.12 |
| Ceanncheathrú-R6-05 | 8 | 5/16" | 7.9 | 13.5 | 0.56 | 14.3 | 400 | 2.8 | 1600 | 11 | 3 | 76 | 0.135 |
| Ceanncheathrú-R6-06 | 10 | 3/8" | 9.5 | 15.1 | 0.62 | 15.9 | 400 | 2.8 | 1600 | 11 | 3 | 76 | 0.16 |
| Ceanncheathrú-R6-08 | 13 | 1/2" | 12.7 | 19 | 0.7 | 19.8 | 400 | 2.8 | 1600 | 11 | 4 | 102 | 0.23 |
| Ceanncheathrú-R6-10 | 16 | 5/8" | 15.9 | 22.2 | 0.9 | 23 | 350 | 2.4 | 1400 | 10 | 5 | 125 | 0.29 |
| Ceanncheathrú-R6-12 | 19 | 3/4" | 19.0 | 25.4 | 1.04 | 26.6 | 350 | 1.7 | 1200 | 10.8 | 5.5 | 140 | 0.38 |
| Ceanncheathrú-R6-16 | 25 | 1" | 25.4 | 1.38 | 35 | 350 | 1.7 | 1200 | 10.8 | 6 | 150 | 0.46 | |
| Cuid Uimh | LD. | OD | W.P. | B.P. | Ga Bend | Meáchan | ||||||
| isteach | mm | mm | isteach | psi | mpa | psi | mpa | isteach | mm | kg/m | lb/ft | |
| R7-05 | 3/16" | 0.45 | 5 | 11.4 | 3045 | 21 | 12180 | 84 | 3.5 | 90 | 0.073 | 0.049 |
| R7-06 | 1/4" | 0.54 | 6.3 | 13.7 | 2785 | 19.2 | 11165 | 77 | 39 | 100 | 0.09 | 0.06 |
| R7-08 | 5/16" | 0.61 | 8 | 15.6 | 2535 | 17.5 | 10150 | 70 | 4.5 | 115 | 0.128 | 0.086 |
| R7-10 | 3/8" | 0.72 | 10 | 18.4 | 2275 | 15.7 | 9135 | 63 | 4.9 | 125 | 0.155 | 0.104 |
| R7-13 | 1/2" | 0.89 | 12.5 | 22.5 | 2030 | 14 | 8120 | 56 | 7.1 | 180 | 0.224 | 0.151 |
| R7-16 | 5/8" | 1.02 | 16 | 25.8 | 1525 | 10.5 | 6090 | 42 | 8.1 | 205 | 0.277 | 0.186 |
| R7-19 | 3/4" | 1.13 | 19 | 28.6 | 1260 | 8.7 | 5075 | 35 | 9.4 | 240 | 0.33 | 0.222 |
| R7-25 | 1" | 1.44 | 25 | 36.7 | 1015 | 7 | 4060 | 28 | 11.8 | 300 | 0.403 | 0.271 |
| Cód ltem | I.D. | D.O. | W.p. | B.P. | Ga Bend | Meáchan | ||||||
| isteach | mm | isteach | mm | psi | mpa | psi | mpa | isteach | mm | kg/m | Ib/ft | |
| R8-05 | 3/16" | 5 | 0.57 | 14.6 | 5000 | 35 | 18270 | 140 | 5 | 125 | 0.7 | 0.47 |
| R8-06 | 1/4" | 6.3 | 0.66 | 16.8 | 5000 | 35 | 16240 | 140 | 7 | 180 | 0.83 | 0.58 |
| R8-10 | 3/8" | 10 | 0.8 | 20.3 | 4060 | 28 | 12180 | 112 | 9.4 | 240 | 1.3 | 0.87 |
| R8-13 | 1/2" | 12.5 | 0.97 | 24.6 | 3553 | 24.5 | 12180 | 98 | 11.8 | 300 | 1.7 | 1.14 |
| R8-16 | 5/8" | 16 | 1.17 | 29.8 | 2784 | 19.2 | 10150 | 77 | 16.5 | 420 | 3.08 | 2.07 |
| R8-19 | 3/4" | 19 | 1.3 | 33 | 2277 | 15.7 | 8120 | 63 | 20 | 500 | 4.3 | 2.89 |
| R8-25 | 1" | 25 | 1.52 | 38.6 | 2030 | 14 | 8120 | 56 | 26 | 660 | 5.63 | 3.78 |
| Cód Mír | ID píobáin | Hose OD | Brú Oibre | Brú pléasctha | Ga Min.Bend | Meáchan | ||||||
| orlach | mm | orlach | mm | psi | MPa | psi | MPa | orlach | mm | kg/m | Ib/ft | |
| R10-06 | 1/4" | 6.3 | 0.8 | 21.4 | 8845 | 61 | 35525 | 245 | 5 | 125 | 0.73 | 0.49 |
| R10-10 | 3/8" | 10 | 1.0 | 24.6 | 7612.5 | 52.5 | 30450 | 210 | 6 | 150 | 0.82 | 0.55 |
| R10-13 | 1/2" | 12.5 | 1.1 | 28.6 | 6307.5 | 43.5 | 25375 | 175 | 8 | 200 | 0.96 | 1.42 |
| R10-19 | 3/4" | 19 | 1.5 | 37.3 | 5075 | 35 | 20300 | 140 | 11 | 280 | 1.65 | 1.11 |
| R10-25 | 1" | 25 | 1.8 | 45.6 | 4060 | 28 | 16240 | 112 | 14 | 360 | 2.3 | 1.55 |
| R10-32 | 1.1/4" | 31.8 | 2.1 | 52.4 | 3045 | 21 | 12180 | 84 | 18 | 460 | 3.25 | 2.18 |
| R10-38 | 1.1/2" | 38 | 2.3 | 58.7 | 2537.5 | 17.5 | 10150 | 70 | 22 | 560 | 3.95 | 2.65 |
| R10-51 | 2" | 51 | 2.8 | 72.1 | 2537.5 | 17.5 | 10150 | 70 | 28 | 710 | 4.95 | 3.33 |
Bíonn tionchar díreach ag roghnú ceart píobáin hiodrálach ar shábháilteacht agus ar éifeachtúlacht an chórais. Is féidir le píobáin meaitseála a roghnú de réir leibhéal brú, cineál meánach agus coinníollacha comhshaoil, agus cothabháil rialta a dhéanamh ar shaol na seirbhíse a uasmhéadú.
★ Timthriall cothabhála agus athsholáthair
Cigireacht laethúil: scoilteanna sa chiseal seachtrach rubair, sreang cruach nochta, sceitheadh ola ón gcomhpháirteach
★ Critéir athsholáthair:
Tá scoilteanna "patrún python" le feiceáil ar an dromchla (comhartha ag dul in aois)
Titeann brú oibre níos mó ná 10%
- Saol molta: 3 ~ 5 bliana (ag brath ar an déine úsáide)
Cén fáth a roghnú Hose Hiodrálacha Hangzhou Haikuo? ——20 bliain d’fhócas, saineolaí tarchuir hiodrálach a bhfuil muinín ag 15,{2}} custaiméir ar fud an domhain as
I réimse an tarchuir hiodrálach, bíonn tionchar díreach ag cáilíocht an píobáin ar shábháilteacht agus ar éifeachtúlacht oibriúcháin an trealaimh. Tá baint mhór ag Hangzhou Haikuo Hydraulics leis an tionscal ar feadh níos mó ná 20 bliain. Le cáilíocht táirgí den scoth, córas praghsanna an-iomaíoch agus seirbhís iar-díolacháin foirfe, tá sé ina chomhpháirtí fadtéarmach de níos mó ná 10,000 cuideachta ar fud an domhain.
1. 20 bliain de charnadh tionscail, saineolaí déantúsaíochta chun cinn teicneolaíochta
Bunaithe i 2003, díríonn sé ar thaighde agus ar fhorbairt agus ar tháirgeadh píobáin hiodrálacha, agus tá próiseáil iomlán amhábhar aige → fíodóireacht / foirceannadh → vulcanization → tástáil → slabhra tionscal iomlán pacáistithe.
Tá an fhoireann theicniúil faoi stiúir innealtóirí le níos mó ná 15 bliain de thaithí, a dhéanann an próiseas táirgthe a bharrfheabhsú go leanúnach chun a chinntiú go gcomhlíonann gach píobán caighdeáin idirnáisiúnta ar nós SAE, DIN, agus GB
Tá an tsaotharlann neamhspleách feistithe le tástálaithe cuisle, tástálaithe brú pléasctha agus trealamh eile chun iniúchadh mhonarcha 100% a bhaint amach
2. Clúdach radharc iomlán: Comhlíonann samhlacha 100+ riachtanais hiodrálacha éagsúla
★ Croí-líne táirge
Píobán braidáilte sreang (SAE 100R1AT / R2AT): 21 ~ 42MPa, oiriúnach le haghaidh meaisíní múnlaithe insteallta agus innealra talmhaíochta
Hose foirceannadh ardbhrú (EN856 4SP/4SH): 42~70MPa, tiomnaithe d'innealra mianadóireachta agus do bhriseoirí hiodrálacha
Hose resistant teocht ard (-40 céim ~+150 céim ): an chéad rogha le haghaidh trealamh réitigh leanúnach i muilte cruach
píobán fhrithstatach: réiteach sábháilteachta do chásanna iompair cheimiceacha agus breosla
★ Cumas saincheaptha
Tacaíonn sé le saincheapadh faid agus nascóirí neamhchaighdeánacha (JIC/NPT/BSPP, etc.)
Soláthraíonn sé píobáin resistant bia agus ábhair speisialta eile.
★ Córas tar éis-díolacháin:
- Tacaíocht theicniúil: Treoir roghnúcháin saor in aisce agus sonraíochtaí suiteála
- Saincheisteanna cáilíochta: Réitigh a sholáthar laistigh de 48 uair an chloig
- Cuairteanna leantacha rialta-: Rianaigh úsáid agus coisc fadhbanna féideartha